Why Vuba Surfaces WA
Resin, kiln-dried stone, primer and tools for a 12-18mm overlay, in local WA stock.
Laid straight over sound concrete or bitumen - no jackhammers, no skip bins.
Uses less material than a full rebuild, with a far better looking result.
Most residential driveways are resurfaced in one visit, driveable within 24-48 hours.
Resin bound overlay works on driveways that are structurally sound - level, well drained and without major cracking or slab movement. Surface staining, oil marks, faded exposed aggregate and hairline cracks are all fine.
If the slab is heaving, badly cracked or moving, an overlay will not fix the underlying problem. Send us photos and we will tell you honestly before you buy materials.
Primer, UV-stable resin and kiln-dried stone at roughly 12-18mm depth, plus a forced-action mixer and trowels. We supply all of it and can work out quantities from your square metreage.
The finished surface is permeable, so rainwater drains through rather than running down the driveway into the street or garage.
Replacing a driveway means demolition, waste disposal, new sub-base, pouring and curing time - weeks of disruption. An overlay is one day of work over the slab you already have, and finishes decorative rather than plain grey concrete.
Call 0480 743 731 or send photos of your driveway through the contact form with your suburb and area. We will confirm whether an overlay suits, quote the materials, and refer an installer if you want it laid for you.
Areas Serviced
We supply and support resurfacing materials projects right across the Perth metro area and regional WA - from coastal homes in Fremantle and Rockingham to new builds in Joondalup, Mandurah and the Perth Hills.
Yes. If the concrete is structurally sound and level, we supply the primer, resin and kiln-dried stone for a 12-18mm resin bound overlay.
Material cost depends on area, stone blend and preparation needed. It is typically well below the cost of removing and re-pouring. Call 0480 743 731 for a quote.
Light foot traffic the same evening and vehicles after roughly 24-48 hours, depending on temperature and humidity.
Hairline cracks are generally fine. Active, moving cracks can reflect through, which is why the slab should be assessed before overlaying.
Explore other Perth surfacing and flooring solutions.
